floor-mounted charging stations_Hongjiali New Energy

Power	120kw
Display	7 Inches Touch Screen with Shell
Installation	Ground-Mounted
Equipment size	L720W401H2000mm / L700W450H1680mm
Input voltage range	AC380V±15%
Output current range	200/250 Amp
Output voltage range	DC200-1000V
IP rating	IP 54
Working Temp	-25 to 55°C
protocol	Protocol (Optional)
Network selection	Ethernet/3G/4G/WIFI (Optional)
Protect	Over Current, Over Voltage, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc.

Product Attributes

Are you looking for a reliable and efficient floor-mounted charging station? Look no further! We are a factory that produces high-quality charging stations. Discover our innovative floor-mounted charging stations, which are perfect for easily charging your devices on the go. Equipped with advanced technology, they can achieve fast charging, which greatly reduces the charging time of electric vehicles. Our floor-mounted charging stations are suitable for retail, apartments, homes, hotels, workplaces and retail locations, providing numerous advantages for commercial and residential environments, and are suitable for a variety of US standard and EU standard floor-mounted charging stations.

Floor-mounted charging station 120kw product parameters are as follows:

Parameters	Requirements
General Requirements
EV Charger Type	DC
Charger Capacity	120KW
Equipment size	L720W401H2000mm / L700W450H1680mm
Product Model NO.	ENC-DCL120B
	ANSI-DCL120B
	JIS-DCL120B
Mounting	Ground-Mounted
Input Requirements
AC Supply System	Three-Phase, 5 Wire AC system
Nominal Input Voltage	AC380V±15%
Input Frequency	45-65Hz
Environmental Requirements
Ambient Temperature Range	-25 to 55°C
Ambient Humidity	5 to 95%
Storage Temperature	-40 to 70°C
Mechanical Requirements
IP Ratings	IP 54
Cooling	Air-cooled
Output Requirements
Number of Outputs	2
Type of Each Output	200-1000VDC
Single Output Max.Current	200/250 Amp
Power Factor	≥0.99(50% load above)
User Interface & Display Requirements
Display & Touch-Screen Size	7 Inches Touch Screen with Shell
User Authentication	QR Code/RFID Card /Password Login
Metering Information	Consumption Units
Communication Requirements
Communication between EVSE and Central server	Protocol (Optional)
Interface between Charger and CMS	Ethernet/3G/4G/WIFI (Optional)
Protection & Safety Requirements
Executive Standard	IEC 62196 2017, IEC 61851 2017, SAE J1772,CHAdeMO etc.
Safety Parameters	Over Current, Over Voltage, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc.

Product Description

Floor-mounted charging station, as an important facility for charging electric vehicles, plays a vital role in modern urban life. The following is a detailed introduction to floor-mounted charging stations:

1. Definition and Features

Definition: Floor-mounted charging station, that is, charging equipment installed on the ground, provides charging services for electric vehicles. It usually includes components such as charger body, charging gun, cable, control system, etc.

Features:

Strong stability: The floor-mounted charging station adopts a stable base design, which can withstand the impact of natural disasters such as large wind and earthquakes, ensuring the safe and stable operation of the equipment.

Flexible layout: Since it is installed on the ground, it can be flexibly configured according to the actual needs and spatial layout of the parking lot to meet the charging needs of different models.

Easy to maintain: The maintenance operation of the floor-mounted charging station is relatively simple, and the staff can easily inspect, repair and replace parts to reduce maintenance costs.

2. Advantages and applications

Advantages:

High charging efficiency: Floor-mounted charging stations usually use high-power charging technology, which can quickly replenish the power of electric vehicles, shorten charging time and improve charging efficiency.

Convenient to use: Users only need to park the electric vehicle near the charger and start charging through simple operations, without looking for a wall-mounted charger or worrying about the problem of insufficient charging cable length.

Environmental protection and energy saving: In the design and production process of the charger, we pay attention to environmental protection and energy saving, use renewable energy and low-carbon technology, and promote the green development of chargers.

Application:

Urban public parking lots and commercial areas: These places are usually crowded, and setting up charging stations can attract more consumers and promote the use of electric vehicles.

Residential communities: As more and more residents choose electric vehicles, property management can provide convenience for residents and improve the service quality of the community by installing charging stations.

Large shopping malls, tourist attractions, hotels and other places: Charging stations are set up in these places, which not only provide charging convenience for customers, but also reflect the support of enterprises for green travel.

Urban public transportation system: such as the charging needs of electric buses and shared bicycles, optimizing the overall efficiency of public travel.

3. Type and power

Floor-mounted charging stations can be classified according to different classification standards, such as DC charging stations and AC charging stations according to the charging method; according to the power size, they can be divided into low-power charging stations, medium-power charging stations and high-power charging stations. Among them, DC charging stations (fast charging) are suitable for professional operations and are mostly equipped in centralized large, medium and small charging stations, while AC charging stations (slow charging) are more suitable for use in places such as homes or communities.

4. Installation and maintenance

Installation: The installation of floor-mounted charging stations needs to consider many factors, such as the load-bearing capacity of the ground, the power access method, the layout of the charging station, etc. During the installation process, it is necessary to ensure the stability and safety of the charging station, and corresponding protective measures, such as rain protection and lightning protection, need to be equipped.

Maintenance: Regular inspection and maintenance of floor-mounted charging stations are important measures to ensure their normal operation. The inspection content includes the appearance of the charger, the integrity of the cables, charging guns and other components, as well as the operating status of the control system. Once an abnormality or failure is found, it needs to be handled and repaired in time.

5. Case display of floor-mounted charging station project

floor-mounted charging station project

Production Certification

floor-mounted charging station Production Certification

FAQ

Q1: Are you trading company or manufacturer?

A: We are a professional electric car charger manufacturer and source factory.

Q2: what is the lead time?

A: Usually, 15-20 working days to produce.

Q3: Can we ask you to print our logo into chargers? Can the color of the plug and wire be customized according to our requirements?

A: Yes. We support OEM/ODM production.

Q4: How about your product quality? What should I do if something goes wrong?

A: First of all, we sell our products for many years, and we have a professional engineering team in this field. Moreover, our products have been strictly inspected and repeatedly tested before leaving the factory, and the good and good rate of the varieties has reached 99.98%. Finally, we have service providers in some areas, please contact us for more information

Q5: What is your quality control system?

A: Complete all incoming material inspection, process inspection, and final inspection; 30 test procedures will be done before the goods leave the factory, and charging test videos will be sent; products have CE, ROHS, FCC, UL, KC certification.

Q6: Can I install the EV charger by myself?

A: Yes, but we suggest the user contact a professional electrician for installation to avoid potential safety hazards.

Q7：Why my charging power is lower than the specification?e?

A: Because during the charging session, a few factors will influence the output. Here is some potential reason:

①The BMS(Battery management system) of the car controls the charging session.

②The Max allowed current was set and limited through your APP.

For more details, please query us at sales@hjlcharger.com

Q8: How much time is required to fully charge my car using this charger?

A: The charging speed is determined by three factors working in conjunction: the On Board Charging (OBC) System, the maximum current allowed by the charging cable, and the EVSE. As an illustration, if the EV's maximum allowed power is 30KW and the battery capacity is 60KWh, it would take approximately 2 hours to charge the battery fully.

Q9: What is dynamic load balancing and why do I need that?

A: Dynamic load balancing is a technique that distributes the electrical load across multiple charging stations based on real-time demand. This helps prevent the electrical grid's overload and ensures that each charging station receives appropriate power.

Dynamic load balancing technology can help distribute the available power among multiple EV chargers in real-time, optimizing available power and reducing the risk of overloading the grid. This can help prevent power outages and reduce the need for costly grid upgrades.

Additionally, dynamic load Balancing can help reduce charging times and improve the overall charging experience for EV drivers, making it a valuable feature for both residential and commercial charging applications.