battery swapping station for e rickshaw

The battery swapping station for e rickshaw is a battery replacement device designed specifically for electric tricycles. It provides users with convenient battery replacement services by centrally managing and storing fully charged batteries. It is an efficient, safe and environmentally friendly battery replacement device. The battery swapping station for e rickshaw has 4, 8, and 12 slots, which can quickly replace the dead batteries of electric bicycles or motorcycles, and provide lithium-ion batteries to electric rickshaw drivers on a pay-per-use basis. It is a place to provide battery replacement services for electric tricycles.

The product technical parameters of the battery swapping station for e rickshaw are as follows:

Product number		MHL04A-DC	MHL08A-DC	MHL12A-DC
Detailed specifications	Rated power	3KW	5KW	7KW
Charging equipment	User Interface	LED/Digital tube
	Bin size	225*250*400(mm)
	Equipment size	550*430*1468(mm)	820*600*1600(mm)	1200*600*1600(mm)
	Input voltage	180~264V/Ac		AC220V
	Input frequency	45~66Hz
	Charging port	2+6 plug wire
	The output voltage	43～75VDC
	Output current	0-10A	10A	0-10A
	Equipment weight	65Kg	100Kg	150Kg
	Fire fighting method	Aerosol fire extinguishing
Electrical indicators	Current limiting protection value	≥110%
	Voltage regulation accuracy	≤±0.5%
	Steady current accuracy	≤±0.5%
	Ripple factor	≤±0.5%
	Efficiency	≥93%	≥92%	≥93%
	Power factor	≥0.99 (over 50% load)
	Harmonic content THD	≤5% (over 50% load)
	Charging mode	Scan code
	Payment method	Scan code payment
	Networking method	4G/Network cable
	Security function	Overvoltage protection, undervoltage protection, overload protection, short circuit protection, grounding protection, over temperature protection, low temperature protection, lightning protection
Environmental indicators	Operating temperature	-25℃~+55℃
	Working humidity	5%~95% non-condensing cream
	Working altitude	<2000m
	Degree of protection	IP54
	Cooling method	Air cooled
	Noise control	≤60dB
	MTBF	100,000 hours

The following is some introduction to the battery swapping station for e rickshaw:

1. Working principle

The working principle of the battery swapping station for e rickshaw is mainly based on the Internet of Things technology and intelligent management system. It uses a combination of software and hardware to achieve real-time monitoring and intelligent management of batteries. Specifically, the battery swapping station for e rickshaw is equipped with one or more groups of charging slots for storing fully charged spare batteries. These batteries are monitored and managed in real time through the Internet of Things technology and sensors, including monitoring their power, status, location and other information. When the status of one or some batteries is found to be abnormal, such as low voltage or overtemperature, the system will automatically alarm and take corresponding measures to ensure safe use.

2. Usage process

The usage process of the battery swapping station for e rickshaw usually includes the following steps:

2.1. Scan the QR code: Users need to use their mobile phones to scan the QR code on the battery swapping station for e rickshaw for identity authentication and login. This step ensures the safety of battery replacement and makes the entire operation process more intelligent and convenient.

2.2. Remove the fully charged battery: After completing the identity authentication, the door of the battery swapping station for e rickshaw will open automatically. Users only need to easily remove the fully charged battery to replace the electric tricycle with a new battery for battery life.

2.3. Return the depleted battery: When the battery of the electric tricycle is exhausted, the user only needs to put the used empty battery back into the battery swapping station for e rickshaw and close the door. The battery swapping station for e rickshaw will automatically charge and maintain the depleted battery to ensure the recycling and environmental protection of the battery.

2.4. Complete the replacement: After returning the empty battery, the battery swapping station for e rickshaw will open a cabinet door again, which contains another fully charged battery. The user only needs to take it out and close the cabinet door to complete the entire battery replacement process.

3. Advantages and characteristics

3.1. Save time: The battery swapping station for e rickshaw greatly saves the charging time of electric tricycle users and improves travel efficiency by "replacing instead of charging".

3.2. Safe and reliable: The battery swapping station for e rickshaw centrally manages and stores batteries, and is equipped with advanced Internet of Things technology and sensors for real-time monitoring and management to ensure the safe use of batteries.

3.3. Convenient operation: The use process of the battery swapping station for e rickshaw is simple and fast, and users can complete the battery replacement in just a few steps.

4. Application scenarios

The battery swapping station for e rickshaw is widely used in various scenarios that require electric tricycles for distribution and transportation, such as logistics parks, express delivery points, takeaway delivery stations, etc. These scenarios have high requirements for the endurance and charging efficiency of electric tricycles. The battery swapping station for e rickshaw can effectively solve these problems.

5. Battery swapping station for e rickshaw project case

Q1: Are you trading company or manufacturer?

A: We are a professional electric car charger manufacturer and source factory.

Q2: what is the lead time?

A: Usually, 15-20 working days to produce.

Q3: Can we ask you to print our logo into chargers? Can the color of the plug and wire be customized according to our requirements?

A: Yes. We support OEM/ODM production.

Q4: How about your product quality? What should I do if something goes wrong?

A: First of all, we sell our products for many years, and we have a professional engineering team in this field. Moreover, our products have been strictly inspected and repeatedly tested before leaving the factory, and the good and good rate of the varieties has reached 99.98%. Finally, we have service providers in some areas, please contact us for more information

Q5: What is your quality control system?

A: Complete all incoming material inspection, process inspection, and final inspection; 30 test procedures will be done before the goods leave the factory, and charging test videos will be sent; products have CE, ROHS, FCC, UL, KC certification.

Q6: Can I install the EV charger by myself?

A: Yes, but we suggest the user contact a professional electrician for installation to avoid potential safety hazards.

Q7：Why my charging power is lower than the specification?e?

A: Because during the charging session, a few factors will influence the output. Here is some potential reason:

①The BMS(Battery management system) of the car controls the charging session.

②The Max allowed current was set and limited through your APP.

For more details, please query us at sales@hjlcharger.com

Q8: How much time is required to fully charge my car using this charger?

A: The charging speed is determined by three factors working in conjunction: the On Board Charging (OBC) System, the maximum current allowed by the charging cable, and the EVSE. As an illustration, if the EV's maximum allowed power is 30KW and the battery capacity is 60KWh, it would take approximately 2 hours to charge the battery fully.

Q9: What is dynamic load balancing and why do I need that?

A: Dynamic load balancing is a technique that distributes the electrical load across multiple charging stations based on real-time demand. This helps prevent the electrical grid's overload and ensures that each charging station receives appropriate power.

Dynamic load balancing technology can help distribute the available power among multiple EV chargers in real-time, optimizing available power and reducing the risk of overloading the grid. This can help prevent power outages and reduce the need for costly grid upgrades.

Additionally, dynamic load Balancing can help reduce charging times and improve the overall charging experience for EV drivers, making it a valuable feature for both residential and commercial charging applications.