Did you know that 80% of electric vehicle charging is done at a charging station? Learn about the charging solution that best suits your needs. We sell electric vehicle chargers for home and commercial installations, providing you with a one-stop electric vehicle charging solution.
At present, the commonly used chargers in electric ev charging stations are DC chargers with powers of 50KW, 60KW, 80KW, 90KW, 100KW, 120KW, 160KW, 180KW, and 240KW. Their product parameters are as follows:
Parameters | Requirements | ||||||
General Requirements | |||||||
EV Charger Type | DC | ||||||
Charger Capacity | 50KW/60KW | 80KW | 90KW/ 100KW | 120KW | 160KW | 180KW | 240KW |
Equipment size | L700*W450*H1680(mm) | L750*W750*H1920(mm) | |||||
Product Model NO. | ENC-DCL060A/B | ENC-DCL080B | ENC-DCL100B | ENC-DCL120B | ENC-DCL160B | ENC-DCL180B | ENC-DCL240B |
ANSI-DCL060A/B | ANSI-DCL080B | ANSI-DCL100B | ANSI-DCL120B | ANSI-DCL160B | ANSI-DCL180B | ANSI-DCL240B | |
JIS-DCL060A/B | JIS-DCL080B | JIS-DCL100B | JIS-DCL120B | JIS-DCL160B | JIS-DCL180B | JIS-DCL240B | |
Mounting | Ground-Mounted | ||||||
Input Requirements | |||||||
AC Supply System | Three-Phase, 5 Wire AC system | ||||||
Nominal Input Voltage | AC380V±15% | ||||||
Input Frequency | 45-65Hz | ||||||
Environmental Requirements | |||||||
Ambient Temperature Range | -25 to 55°C | ||||||
Ambient Humidity | 5 to 95% | ||||||
Storage Temperature | -40 to 70°C | ||||||
Mechanical Requirements | |||||||
IP Ratings | IP 54 | ||||||
Cooling | Air-cooled | ||||||
Output Requirements | |||||||
Number of Outputs | 1 or 2 | 2 | |||||
Type of Each Output | DC200-750V / DC150-500V(JIS) | ||||||
Single Output Max.Current | 200 Amp | ||||||
Power Factor | ≥0.99(50% load above) | ||||||
User Interface & Display Requirements | |||||||
Display & Touch-Screen Size | 7 Inches Touch Screen with Shell | ||||||
User Authentication | QR Code/RFID Card /Password Login | ||||||
Metering Information | Consumption Units | ||||||
Communication Requirements | |||||||
Communication between EVSE and Central server | OCPP 1.6J Protocol (Optional) | ||||||
Interface between Charger and CMS | Ethernet/3G/4G/WIFI (Optional) | ||||||
Protection & Safety Requirements | |||||||
Executive Standard | IEC 62196 2017, IEC 61851 2017, SAE J1772,CHAdeMO etc. | ||||||
Safety Parameters | Over Current, Over Voltage, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc. |