11 kW EV Charger Type 2 OCPP AC Wall Box Electric Vehicle Charging Station with Display, Various Standard 11kW Electric Vehicle Charger, Products can be supplied to all over the world, With Payment System, High Efficiency and Strong Durability, Suitable for residential and commercial use.
The 11 kW electric vehicle charger has a voltage of 380V 240V AC, a current of 16A/50A, and an output power of 11 kW. It has high charging efficiency and can meet the charging needs of most electric vehicles. It can provide faster charging services for some high-end electric vehicles. , the charging speed can be saved to be fully charged in 5 hours.
The product parameters of the 11 kw ev charger are as follows:
Parameters | Requirements | |
General Requirements | ||
EV Charger Type | AC | |
Charger Capacity | 11KW | |
Equipment size | L359*140*H510(mm) | |
Product Model NO. | ENC-ACB/L011A | ANSI-ACB/L011A |
Mounting | Wall-Mounted/Column Type | |
Input Requirements | ||
AC Supply System | Single-Phase, 3 Wire AC system(ANSI) | |
Three-Phase, 5 Wire AC system(ENC) | ||
Nominal Input Voltage | AC380V±15%(ENC) / AC240V±15%(ANSI) | |
Input Frequency | 50±3Hz | |
Environmental Requirements | ||
Ambient Temperature Range | -25 to 55°C | |
Ambient Humidity | 5 to 95% | |
Storage Temperature | -40 to 70°C | |
Mechanical Requirements | ||
IP Ratings | IP 55 | |
Cooling | Natural Cooling | |
Output Requirements | ||
Number of Outputs | 1 | |
Type of Each Output | AC380V±15%(ENC) / AC240V±15%(ANSI) | |
Single Output Max.Current | 16 Amp/50 Amp | |
User Interface & Display Requirements | ||
Display & Touch-Screen Size | 4.3 Inches Screen | |
User Authentication | QR Code/RFID Card /Password Login | |
Metering Information | Consumption Units | |
Communication Requirements | ||
Communication between EVSE and Central server | OCPP 1.6J Protocol (Optional) | |
Interface between Charger and CMS | Ethernet/3G/4G/WIFI (Optional) | |
Protection & Safety Requirements | ||
Executive Standard | IEC 62196 2017, IEC 61851 2017, SAE J1772, etc. | |
Safety Parameters | Over Current, Over Voltage, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc. |