wallbox 22kw 11kw type 2 smart charging station

The wallbox 22kw 11kw type 2 smart charging station is an important device that provides a fast and convenient charging solution for electric vehicles. It has the characteristics of efficient charging, intelligent control, strong compatibility, safety and reliability, and easy installation. It is one of the important equipment in the field of electric vehicle charging. Suitable for indoor and outdoor environments, it can meet home and commercial needs.

The wallbox 22kw 11kw type 2 smart charging station has intelligent charging and flexible configuration, intelligent authentication, plug and play, intelligent load management, flexible and convenient. Connector commercial use with OCPP. Equipped with App/RFID/WIFI/Bluetooth.

The product parameters of the wallbox 22kw 11kw type 2 smart charging station are as follows:

Parameters	Requirements
General Requirements
EV Charger Type	AC
Charger Capacity	11KW	22KW
Equipment size	L359*140*H510(mm)
Product Model NO.	ENC-ACB/L011A	ENC-ACB/L022A
	ANSI-ACB/L011A
Mounting	Wall-Mounted/Column Type
Input Requirements
AC Supply System	Single-Phase, 3 Wire AC system(ANSI)
	Three-Phase, 5 Wire AC system(ENC)
Nominal Input Voltage	AC380V±15%(ENC)	AC380V±15%
	AC240V±15%(ANSI)
Input Frequency	50±3Hz
Environmental Requirements
Ambient Temperature Range	-25 to 55°C
Ambient Humidity	5 to 95%
Storage Temperature	-40 to 70°C
Mechanical Requirements
IP Ratings	IP 55
Cooling	Natural Cooling
Output Requirements
Number of Outputs	1
Type of Each Output	AC380V±15%(ENC)	AC380V±15%
	AC240V±15%(ANSI)
Single Output Max.Current	16 Amp/50 Amp	32 Amp
User Interface & Display Requirements
Display & Touch-Screen Size	4.3 Inches Screen
User Authentication	QR Code/RFID Card /Password Login
Metering Information	Consumption Units
Communication Requirements
Communication between EVSE and Central server	OCPP 1.6J Protocol (Optional)
Interface between Charger and CMS	Ethernet/3G/4G/WIFI (Optional)
Protection & Safety Requirements
Executive Standard	IEC 62196 2017, IEC 61851 2017, SAE J1772, etc.
Safety Parameters	Over Current, Over Voltage, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc.

I. Basic Overview

Type: Wall-mounted

Power: 22kW/11kW

Model: Type 2

Function: Smart Charging

II. Main Features

Efficient Charging: The output power of 22kW and 11kW can meet the charging needs of different electric vehicles and provide a fast charging experience.

Intelligent control: Equipped with an intelligent control system, it supports multiple operation modes such as APP control and remote control, which is convenient for users to monitor the charging status and adjust the charging parameters at any time.

Strong compatibility: It supports multiple electric vehicle charging standards, such as SAE J1772 and IEC 62196, etc., ensuring compatibility with a wide range of electric vehicles.

Safe and reliable: Made of high-quality materials and advanced processes, it has safety functions such as overvoltage protection to ensure the safety and reliability of the charging process.

Easy to install: The wall-mounted design makes the charging station easy to install and use, occupies a small space, and is suitable for installation in places such as home garages and parking lots.

III. Technical specifications

Input voltage: Usually AC240V±15% (single-phase) or AC380V±15% (three-phase), depending on the product model and regional requirements.

Output current: Determined according to the output power and voltage, it provides a stable charging current.

Charging interface: A charging interface that complies with the IEC 62196-2 standard to ensure matching with the charging interface of electric vehicles.

Cable length: Usually equipped with a certain length of charging cable, which is convenient for users to connect electric vehicles for charging.

4. Usage steps

Preparation: Make sure the charging station is properly installed and connected to the power supply, and check whether the charging interface of the electric vehicle is clean and undamaged.

Connection: Insert the plug of the charging cable into the charging interface of the electric vehicle and confirm that the connection is firm.

Start: Start the charging process through the APP or the control panel on the charging station, and set the charging parameters as needed.

Monitoring: During the charging process, you can monitor the charging status and charging progress through the APP or the display on the charging station.

End: After charging is completed, end the charging process according to the prompts of the charging station or the instructions of the APP, and disconnect the charging cable from the electric vehicle.

5. Precautions

Regular inspection: Regularly inspect and maintain the charging station to ensure that it is in good working condition.

Safe use: When using the charging station, be sure to comply with relevant safety regulations and operating procedures to ensure personal and property safety.

Avoid moisture: The charging station should be installed in a dry and ventilated environment to avoid long-term exposure to moisture and damage to the equipment.

6. Market application

The wallbox 22kw 11kw type 2 smart charging station is widely used in home garages, parking lots, shopping centers and other places to provide convenient charging services for electric vehicle users.

VII. Project Cases

Q1: Are you trading company or manufacturer?

A: We are a professional electric car charger manufacturer and source factory.

Q2: what is the lead time?

A: Usually, 15-20 working days to produce.

Q3: Can we ask you to print our logo into chargers? Can the color of the plug and wire be customized according to our requirements?

A: Yes. We support OEM/ODM production.

Q4: How about your product quality? What should I do if something goes wrong?

A: First of all, we sell our products for many years, and we have a professional engineering team in this field. Moreover, our products have been strictly inspected and repeatedly tested before leaving the factory, and the good and good rate of the varieties has reached 99.98%. Finally, we have service providers in some areas, please contact us for more information

Q5: What is your quality control system?

A: Complete all incoming material inspection, process inspection, and final inspection; 30 test procedures will be done before the goods leave the factory, and charging test videos will be sent; products have CE, ROHS, FCC, UL, KC certification.

Q6: Can I install the EV charger by myself?

A: Yes, but we suggest the user contact a professional electrician for installation to avoid potential safety hazards.

Q7：Why my charging power is lower than the specification?e?

A: Because during the charging session, a few factors will influence the output. Here is some potential reason:

①The BMS(Battery management system) of the car controls the charging session.

②The Max allowed current was set and limited through your APP.

For more details, please query us at sales@hjlcharger.com

Q8: How much time is required to fully charge my car using this charger?

A: The charging speed is determined by three factors working in conjunction: the On Board Charging (OBC) System, the maximum current allowed by the charging cable, and the EVSE. As an illustration, if the EV's maximum allowed power is 30KW and the battery capacity is 60KWh, it would take approximately 2 hours to charge the battery fully.

Q9: What is dynamic load balancing and why do I need that?

A: Dynamic load balancing is a technique that distributes the electrical load across multiple charging stations based on real-time demand. This helps prevent the electrical grid's overload and ensures that each charging station receives appropriate power.

Dynamic load balancing technology can help distribute the available power among multiple EV chargers in real-time, optimizing available power and reducing the risk of overloading the grid. This can help prevent power outages and reduce the need for costly grid upgrades.

Additionally, dynamic load Balancing can help reduce charging times and improve the overall charging experience for EV drivers, making it a valuable feature for both residential and commercial charging applications.